If you would like to use this header on front-panel, please remove all jumpers from this header and install your special extra microphone and line-out cable instead. If you press Y, and then Enter, the Setup Utility loads a set of best-performance default values. Please make sure you plug each in the right direction. Load Optimal Settings If you select this item and press Enter a dialog box apperars. These default values are not very demanding and they should allow your system to function with most kinds of hardware and memory chips. Audio Device Use this item to set the onboard AC’97 audio chip. When enabled, separate memory banks are set of odd and even addresses, and upcoming byte of memory is accessible while refreshing the current byte.

Uploader: Arasida
Date Added: 25 October 2016
File Size: 36.45 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 32642
Price: Free* [*Free Regsitration Required]

Information in this manual has been carefully checked for reliability; however, no guarantee is given as to the correctness of the contents. Normally, if your mainboard supports a hardware monitoring function, a 3-pin fan power connector can have your system detect the CPU fan’s speed. This publication, including all photos, illustrations, and software, is protected under qv49p copyright laws, with all rights reserved.

Two mini jumpers must be setted on pins and pinswhen this header is not used. If you press Y, and then Enter, the Setup Utility loads a set of best-performance default values. Locate Pin 1 in the socket and look for a black dot or cut edge on the CPU upper interface. Key in a new password that can not exceed eight characters.


Shuttle AV49PN VIA PT Socket ATX MB w/SATA (AV49PN) Motherboard |

rxid To make your first computer DIY experience successful, right from the start, we have designed the 3. System date and time Hardware execution sequence Power management functions Allocation of system resources 5. To short jumper pins, simply place a plastic mini jumpers over the desired pair of pins. To match the holes on both properly, the key point is to make the back panel of the mainboard in a close taid with your system case, as shown below.

Trademarks Shuttle is a registered trademark of Shuttle Inc.

Shuttle AV49P/N RAID Driver

Power on, Last state or Power A49p. If the over-clocking fails, please turn off the system power. The system will automatically detect the kind of CPU that you have installed and make the appropriate adjustments to the items. Note that there are kinds of CPU fan connectors. The following list will help you to identify jumpers, slots, and connectors along with their assigned functions: Attach a connector cable to the 2-pin PW BN header on the mainboard.

If you press Y, and then Enter, the Setup Utility loads a set of fail-safe default values. Floppy cable connector 1 FDC1 3. If you do not press the keys in time and system does not boot, the screen will prompt an error message, and you will be given the following options: Set the required jumpers on each device according to the instructions provided by the manufacturer.


These default values are quite demanding and your system might not function properly if you are using slower memory chips or other low-performance components.

The auto-run program will display the driver’s main installation window on screen. If it is set to Min Saving, powersaving modes occur after a longer timeout. The Main Menu allows you to select from several setup functions and exit choices.

Shuttle Computer AV49P/N Free Driver Download (Official)

Otherwise, leave this item at the default. Driving Use this item to signal driving current on AGP cards to auto or manual.

The ATX power connector is directional and will not go in unless the guides match perfectly, making sure that pin 1 is properly positioned. The system BIOS is managing and executing a variety of hardware related functions in the system, including: Setup Items The main menu includes the following main setup categories.


Free Download Shuttle AV49P N RAID Driver – Shuttle AV49P N RAID Driver download

Pin 1 on the top: Y Pressing ‘Y’ loads a set of best-performance default values. Pin 1 to the left: The information contained in this manual is provided for general use by the customers. The total installed memory does not exceed 2GB.