One client had an issue where his switches would not auto-negotiate correctly with the printer. This size will usually be incorrect. Our printer technology BOCA’s Lemur family of ticket printers are the most flexible and powerful direct thermal printers on the market today. If you plan on using your printer with a Parallel interface you will need to remove the gender changer that was added to the Parallel port in order to accommodate the conversion cable. They can also be set through the control panel and Web Menus. It must send its responses through a gateway in order to reach the destination host.

Uploader: Goltile
Date Added: 4 December 2017
File Size: 11.2 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 1933
Price: Free* [*Free Regsitration Required]

The Subnet Mask is used by the printer to determine if the destination is on a connected network direct route. Do not connect the printer to your computer until after the driver has been installed. If your printer has a factory installed USB interface, your printer should automatically install if you have the Boca drivers installed.

A generic error condition is reported when something goes wrong like a paper jam or paper out.


Please note that none of the upcoming instructions apply to the Generic Text Driver. Click Next and wait for a bit. Using the TEST button will move you over to the next numeric value. Click OKthen click Nextthen click Finish and wait a bit. The default setting is seconds. It is up bocz the customer to reset it to 0. In this case, all packets meant for the Gateway will be silently discarded. You should ask the vendor of your network interface whether it supports promiscuous mode.



Install Ethereal on the same computer that the Boca was initially installed on. This problem has also been reported for Netgear dual-speed hubs, fggl may exist for other “auto-sensing” or “dual-speed” hubs.

Item 2 is necessary to print tickets. Try both approaches if possible and see if one is better than the other. High resolution graphics and a variety of industry standard bar codes can be easily printed. Content copyright – In the event that the connection remains open for an excessive amount of time, the printer may reset the connection and discontinue the application if another application requests service see Idle Bocca Command. This command permanently changes the Subnet Mask for the network and stores it in flash.

The default is a text file.

However, the following description will explain the use and limitations of this feature. While Boca does not support every Ethernet protocol, the printer supports a sufficient number of high level protocols to function effectively as a network printer. Printer Driver Installation Guides.

Top plates are substituted for hoppers on vertical printers. A dgl freeware program called Netcat works with the printer and can be used as is, modified or referred to as a guideline for writing your own program. After a total of s, the Boca will send a RST packet and terminate the connection.


All of the printers with the exception of the Lemur-S internal storage are available in a kiosk version. LPQ – requests printer status.

This driver is typically used by certain ticketing systems that use web browsers to send non-graphic, FGL commands to the printer. If it does, you should ask whoever supplied the driver for the interface the vendor, or the supplier of the OS you’re running on your machine whether it supports promiscuous mode with that network interface.

While our printer drivers do not support bi-directional communication, it is possible to selectively bypass the driver in the Windows Environment in order to communicate bi-directionally as described on the BiDirectional Interface page.

Go to next step either way. If your desired ticket size is unavailable, you will need to add your own page size as follows: This method will work with any PC and any software while supporting full bi-directional communication.